KEEP IT M!NE.

Developed for festivals, venues and nightlife

Drink protection for festivals, venues and events

M!NE is a self-adhesive single-use cover to be offered wherever drinks are served. The cover attaches around the rim of the glass and places a visible physical barrier over the opening. We are finalising the solution for trials with venues, festivals and organisers.

Can be offered free of charge, as an optional add-on of no more than NOK 3, or funded by a partner.

Two cocktail glasses with black M!NE drink covers on a bar counter in warm evening lighting
Concept illustration based on the current product design.

VALUE

A CHOICE FOR GUESTS. PRACTICAL FOR VENUES.

A CHOICE FOR GUESTS

  • An optional offer when the drink is ordered
  • A visible physical barrier over the glass opening

VISIBLE GUEST CARE

  • A practical measure guests can see and use
  • Shows that the venue prioritises the guest experience and safety

LESS SPILLAGE AND WASTE

  • Can help reduce spills when drinks are carried
  • Can reduce unnecessary drink waste

SIMPLE SERVICE

  • Available from the dispenser or handed out with the drink
  • Attached by the guest or handled according to the venue’s routines

THE PRODUCT

M!NE Original: black round drink cover with gold rim, KEEP IT M!NE. and PEEL · COVER · SIP
Illustration of the current product design. Final material, dimensions and design may be adjusted before production.

A THIN COVER. A SIMPLE CHOICE.

The cover attaches around the rim of the glass and places a visible physical barrier over the opening – developed for festivals, nightlife venues, arenas and other busy serving environments.

  1. 01

    EASY TO ATTACH

    Peeled off the backing paper and attached around the rim of the glass. The solution is being developed for easy use in busy serving environments.

  2. 02

    STRAW OPENING

    A pre-cut X-opening lets the straw pass through the cover without removing it.

  3. 03

    DEVELOPED FOR COMMON SERVING GLASSES

    Size and fit are being tested on common cocktail glasses, beer glasses and plastic cups. Final dimensions will be set before commercial production.

  4. 04

    IN DEVELOPMENT: DRINKING DIRECTLY

    A closed, tear-off opening for drinking directly from the glass is under development and will be tested before it may be included in the final product version.

WHY WE ARE BUILDING M!NE

I grew up with the advice to watch my drink. But in a crowded venue, it takes only a few seconds of distraction before your attention is elsewhere.

That is why we are developing M!NE: a single-use cover that should be available wherever drinks are served, so guests can easily choose to cover their glass.

Nathalie Syvertsen, founder of M!NE

HOW IT WORKS

PEEL. COVER. SIP.

01

PEEL

Peel the drink cover off the backing paper.

02

COVER

Attach the drink cover firmly around the rim of the glass.

03

SIP

Push the straw through the pre-cut opening.

Concept illustration of a black M!NE dispenser with a stack of drink covers and a hand taking out one cover

AVAILABLE AT THE SERVING POINT

A DEDICATED PLACE FOR M!NE.

The dispenser is being developed as a practical way to keep the covers organised, visible and easily accessible at the bar or serving point. The aim is to make M!NE simple to offer without creating unnecessary friction in a busy serving environment.

  • 01Covers are kept organised and within easy reach.
  • 02Guests or staff can take one cover at a time.
  • 03A QR code can provide guidance on what to do if drink spiking is suspected and where to seek further help.

The dispenser is currently a concept illustration. Capacity, materials, dimensions and final construction will be determined during product development.

PAYMENT MODELS

ONE SOLUTION. THREE WAYS TO OFFER IT.

The venue chooses the model that best suits its operations, guests and event.

01

INCLUDED BY THE VENUE

The venue or organiser covers the cost, and guests receive M!NE at no extra charge.

02

THE GUEST CHOOSES

M!NE is offered as an optional add-on of no more than NOK 3 when the drink is ordered. This lets the venue cover the purchase cost without raising the price of every drink.

03

PARTNER FUNDED

A relevant partner can fund all or part of the solution and receive agreed visibility on the cover or information materials.

The venue chooses the model. Always optional for the guest.

BRANDING

A VISIBLE MEASURE. A POWERFUL BRAND PLATFORM.

M!NE can be supplied in our original design, adapted to your venue or used in a partner collaboration.

Black round M!NE cover with gold rim reading KEEP IT M!NE. and PEEL · COVER · SIP

M!NE ORIGINAL

The standard design for venues, festivals and events.

Black round M!NE cover with gold rim, BAR / FESTIVAL, X-opening and tear-off marking

CUSTOM BRANDING

Drink cover and information materials adapted to the venue's or event's visual identity.

Black round M!NE cover with gold rim, BAR / FESTIVAL and SUPPORTED BY PARTNER

PARTNER BRANDING

Branding combined with a relevant partner who can fund all or part of the solution.

The illustrations show possible branding options. Final design is agreed before production.

PILOT

TEST M!NE IN YOUR OWN SERVING ENVIRONMENT

A pilot lets your business test M!NE in a real serving environment and assess fit, handling, distribution and actual use among guests.

A pilot proposal is tailored to your serving points, expected use, desired branding and how M!NE will be offered to guests.

  1. 01Clarify needs and serving environment
  2. 02Choose distribution and payment model
  3. 03Test the solution and assess actual use

Final specifications, price, lead time and documentation are clarified before implementation.

QUESTIONS & ANSWERS

COMMON QUESTIONS ABOUT M!NE.

Find concise answers to common questions about the product, pilots and partnership models.

INTERESTED IN M!NE?

LET'S EXPLORE A SOLUTION FOR YOU.

M!NE IS MOVING TOWARDS PILOT

Physical product samples have been produced, and available documentation has been reviewed with Norwegian specialists in materials and food contact. We are now completing the final clarifications on adhesive, material choice and product design before pilot.

We already welcome dialogue with venues, festivals, arenas and partners who would like to assess the solution or take part in a future pilot.

Tell us briefly who you are. We will get in touch for a no-obligation assessment of your needs, product status and a possible pilot setup.

Fields marked * are required.

By submitting this form, you agree that M!NE may use the information provided to respond to your enquiry. Read our Privacy Policy.

Nathalie Syvertsen, founder of M!NE

Nathalie Syvertsen

Founder of M!NE

Have a question about M!NE or would you like to explore a collaboration? Please get in touch.

hello@minecover.no